Manthorpe
manufactures a range of cavity
trays to suite all requirements
for stepped, horizontal, blockwork or stone details.
All are
available with or without lead
attached.
Apex
Tray Packed in 25’s
Product
Code GW290
Fitted at the top of the system water drains from either end of the GW290 Apex Tray onto the left or right hand intermediate trays.
The GW290 can be supplied with or without lead.
Intermediate
Trays
(Right & Left Hand) Packed
in 25’s
Product
Code GW291 (RH) GW292 (LH)
Manthorpe's Intermediate Trays, GW291 or GW292, are simply built up above the finished roof line in a stepped fashion.
The GW291 and GW292 can be supplied with or without lead.
Catchment
Tray
Packed in 25’s
Product
code GW293
The GW293 Catchment Tray is fitted first at the bottom of the system and provides a collection point for water from where it is safely diverted out of the wall via a Manthorpe G950 Weep Vent.
The GW293 can be supplied with or without lead.
Corner
Catchment Trays Packed
in 25’s
Product
code GW293CC (RH) GW293CC (LH)
The GW293CC Corner Catchment Tray is designed for situations where an abutment ends at a corner to shield the corner from water entry, and where restricted space prohibits the fitting of a standard catchment tray.
Water must be safely diverted out of the wall via a Manthorpe G950 Weep Vent.
The GW293CC can be supplied with or without lead.
Internal
and External Corner Trays Packed in
25’s
Product
Code GW296 (Internal)
GW297 (External)
The GW296 Internal Corner tray and GW297 External Corner tray are used when a horizontal or refurbishment run of trays has to run through a 90° angle.
The GW296 and GW297 can be supplied with or without lead.
Horizontal
Tray Packed
in 25’s
Product
Code GW295
Manthorpe's GW295 Horizontal Tray is a 900mm injection moulded tray which incorporates interlocking stop-ends for ease of fitting.
The pull-away mortar strips clipped to the front of the tray provide a perfectly chased out slot for quick and simple lead insertion. Each tray is a self contained unit to ensure a failsafe system.
The GW295 can be supplied with or without lead.
Refurbishment
Tray Packed
in 25’s
Product
Code GW294
The GW294 tray is a 450mm version of the GW295 but is specifically designed for use in refurbishment situations.
The trays are retro-fitted by removing three bricks at a time from the existing wall and sliding the tray into position through the gap.
The GW294 can be supplied with or without lead.
Stop Ends Packed
in 25’s
Product
Code GW298 (RH)
GW299 (RH)
Depending on the detail it may be necessary to cut down a Horizontal Tray to fit at corner details. A GW298 or GW299 Stop End should be used to terminate a cut down tray.
Long
Stone / Blockwork Tray Packed
in 25’s
Product
code GW291
LBS (RH)
GW292
LBS (LH)
The GW291 LBS & GW292 LBS Long Stone / Blockwork Intermediate trays suit low pitches in typically 150mm, 225mm coursing in either stonework or blockwork.
The flexible perpend protector attached to the tray prevents driving rain penetrating the outer wall and tracking across the masonry.
The tray has a unique front mortar clip that can be removed at any time once the mortar has set leaving a 25mm deep aperture into which the lead is inserted into and secured with lead wedges.
The GW291 LBS & GW292 LBS Long Stone / Blockwork Intermediate trays can be supplied with or without lead.
Short
Stone / Blockwork Tray Packed
in 25’s
Product
Code GW291
SBS (RH)
GW292
SBS (LH)
The GW291 SBS & GW292 SBS Short Stone / Blockwork Intermediate trays suit larger course heights typically 150mm, 225mm in either stonework or blockwork.
The flexible perpend protector attached to the tray prevents driving rain penetrating the outer wall and tracking across the masonry.
The tray has a unique front mortar clip that can be removed at any time once the mortar has set leaving a 25mm deep aperture into which the lead is inserted into and secured with lead wedges.
The GW291 SBS & GW292 SBS Short Stone / Blockwork Intermediate trays can be supplied with or without lead.
Stone
/ Blockwork Catchment Tray Packed
in 25’s
Product
Code GW293
BS (RH)
GW293
BS (LH)
The GW293 BS Catchment trays are suitable for larger coursing heights typically 150mm, 225mm in either stonework or blockwork. This tray is located at the lowest point of the abutment.
The flexible perpend protector attached to the tray prevents driving rain from penetrating the outer wall and tracking across the masonry.
A G950 Weep Vent must be used in conjunction with this tray to drain the collected water away.
The tray has a unique front mortar clip that can be removed at any time once the mortar has set leaving a 25mm deep aperture into which the lead is inserted and secured with lead wedges.
The GW293 BS Catchment Tray can be supplied with or without lead.
Stone
/ Blockwork Catchment Tray Packed in 25's
Product
Code GW293CC
BS (RH)
GW293CC
BS (LH)
The GW293 CC BS Corner Catchment trays are suitable for larger coursing heights typically 150mm, 225mm in either stonework or blockwork.
It is designed for situations where an abutment ends at a corner to shield the corner from water entry, and where restricted space prohibits the fitting of a standard catchment tray.
The flexible perpend protector attached to the tray prevents driving rain from penetrating the outer wall and tracking across the masonry.
A G950 Weep Vent must be used in conjunction with this tray to drain the collected water away.
The tray has a unique front mortar clip that can be removed at any time once the mortar has set leaving a 25mm deep aperture into which the lead is inserted and secured with lead wedges.
The GW293 CC BS Catchment Tray can be supplied with or without lead.
